The collar of clothes needs special collar lining，which is divided into hard collar lining and soft collar lining. The lining should be cut with a clean template and at a 45 ° angle or horizontally (according to the need). The collar made in this way is beautiful.
Above are the pictures of different styles of collars
Next, take the shirt as an example:
The rubber surface of the collar is generally flat rubber. It looks like a bright layer of glue. Pressing temperature of collar: steam above 170℃.
Here are 2 ways of making a collar lining suggested by wholesale fitness clothing supplier.
How to Make A Collar Lining: Method 1
Fold the lining in half and draw on the lining using a 1/2 net collar pattern.
Then cut off the net lining.
Tip: When cutting, don’t cut the wrong position.
How to Make A Collar Lining: Method 2
Lay the lining flat with the glue side down, and then draw a complete lining with a clean template.
Then cut off the net collar. The collar cut in this way is not easy to misplace.
The glue of the lining needs high temperature to melt, such as steam above about 170℃.
Tip: 170°C, generally in the “cotton and linen” mode of the iron.
The collar made in this way is smooth and straight.
In addition, the large lining should also be cut into a net collar. Generally, the lining is used on the collar surface.
Tailoring of suit lining: cross-cut on the collar surface, 45° diagonal cut at the bottom of the collar, thin collar lining of the suit.
